Horizontal diaphragm pressure tank

Precautions for installation and commissioning1. The total length of the tank is less than 10% of the length of the tank.Two. The inside slag of the tank must be clean and the angle of the welding

The scope is defined as the maximum working pressure is greater than or equal to 0.1MPa (gauge pressure) gas, liquefied gas and the maximum working temperature is higher than or equal to the standard boiling point of the liquid, the volume is greater than or equal to 30L and the internal diameter (non-circular section refers to the maximum geometric size of the boundary of the section) is greater than or equal to 150mm of fixed containers and mobile containers; Gas cylinders with nominal working pressure greater than or equal to 0.2MPa (gauge pressure), and the product of pressure and volume greater than or equal to 1.0MPa·L, liquefied gas and standard boiling point equal to or lower than 60℃ liquid; Oxygen chamber.

Key words：

Related Products

Precautions for installation and commissioning

1. The total length of the tank is less than 10% of the length of the tank.

Two. The inside slag of the tank must be clean and the angle of the welding is turned into a round angle.

Three. After the tank is assembled, the 0.1kg pressure is washed first. The purpose is to discharge the internal gas of the capsule (not higher than the 0.1kg pressure).

Four, the 5~10kg water is the lowest starting point (keeping a certain dead water in the tank, preventing the loss of power and loss of water to cause the capsule breakage).

Therefore, in accordance with the commissioning and installation of protective devices, for the protection of capsules, we must pay attention to it.

Diaphragm type pressure tank (horizontal) specification parameter table

Specifications	Design pressure MPa	Total volume m3	Effective volume m3	Tank specification （mm）						Foot size（mm）
				Ф	L	Interface	L1	H	H1	C	E	Ф1
Ф1000	0.6	1.45	0.393~0.53	1000	2150	DN100	500	950	165	500	1018	20
Ф1000	1.0			1000
Ф1000	1.6			1000
Ф1200	0.6	2.21	0.6~0.8	1200	2300	DN100	500	1050	165	720	950	24
Ф1200	1.0			1200
Ф1200	1.6			1200
Ф1400	0.6	3.6	0.9~1.3	1400	2800	DN100	550	1150	165	840	1200	24
Ф1400	1.0			1400
Ф1400	1.6			1400
Ф1600	0.6	5.2	1.3~1.9	1600	3000	DN100	550	1250	165	960	1100	24
Ф1600	1.0			1600
Ф1600	1.6			1600
Ф1800	0.6	7.5	1.9~2.7	1800	3400	DN100	650	1350	165	1120	1494	24
Ф1800	1.0			1800
Ф1800	1.6			1800
Ф2000	0.6	10.1	2.6~3.6	2000	3700	DN100	850	1450	165	1220	1494	24
Ф2000	1.0			2000
Ф2000	1.6			2000
Ф2200	0.6	13.4	3.4~4.7	2200	4050	DN100	1000	1550	165	1380	1606	24
Ф2200	1.0			2200
Ф2200	1.6			2200
Ф2400	0.6	17.6	4.4~6.2	2400	4450	DN100	1000	1650	165	1520	1810	24
Ф2400	1.0			2400
Ф2400	1.6			2400

Pre

At work

Vertical diaphragm pressure tank

Pre

Vertical diaphragm pressure tank

Capsule storage tank - vertical

NumberVolumem3ФLBHDH110.680012209261852650105520.8100014221126168775079031.01000142211261977750108041.5120016261330200596098052.01200162613302490960146563.0140018301534262311501500

Heat exchanger

Reaction kettle

Deaerator

< 1 2 3 4...9 >

Pressure vessel solutions for your industry, ready for your choice